931 595 691

Servicios

Estándares específicos de cliente

VDA 19.1 – ISO 16232

¿Se cliente le ha facilitado una especificación que matiza o complemente la norma de ensayo ? Trabajamos con numerosos estándares de cliente. Puede visualizar  una muestra a continuación. ¿No encuentra el estándar que busca? ¡Estamos a disposición!

A

  • BEHR
    PN AR.01042 Residual lubricant content on met. material surfaces.
  • BITRON
    7.2-019 Especificación nivel de limpieza.
  • BMW
    QV 11738028 Anforderungsgerechte Techn. Sauberkeit.
    QV 11 111 Technical Cleanliness of Components and Fluids in BMW Power Train.
    11224613-000-02 Requirements Specification.
    10356681-000-03 Requirements Specification.
  • BORGWARNER
    S1371 Cleanliness Specification.
    S3197 Degreasing Specication.
    SDOC-37-161 BorgWarner PDS ETC Products Cleanliness Standard.
    STN 400 Interne Prüfnorm für metallische Eigenfertigungs- und Zuliefererteile.
    TSES-1338 Component Cleanliness Specification.
    EPS 24120824 Engineering Product Specification.

CONTINENTAL

  • CTFluid-AC R_04 SP0001 C Impurity of components
  • N 002 02.20 001 Standard for Product Cleanliness.
  • N 002 02.20 002 Standard for Product Cleanliness.
  • N 002 02.20 005 Standard for Product Cleanliness.
  • N 002 02.21 001 Standard for Product Cleanliness.

DAIMLER

  • BDL 6516 Specification of Residual Dirt Limit Values.
  • BDL 7381 Organic coating for metallic parts (outer side | underside | engine compartment).
  • MBN 11126 Technical Cleanliness for Electrical/Electronic and High Voltage Components.
  • VAM00328 Cleanliness requirements.

DANA

  • ES-0320 Axle Component Cleanliness

ELRINGKLINGER

  • CI BU-B/F 001 Technical cleanliness manual.

FORD

  • ES7T4E-6B616-AA Engineering Specification Engine Oil Pump System Contm DTRM.
  • ESBB53-6C646-AA Engineering Specification High Pressure Charge Air Duct.
  • ESBC3P-7W092-BA Engineering Specification TDE Contamination Specification.
  • ESNL38-7W092-AA Engineering Specification Transmission Contamination Specification.
  • 1T50, EX50, 1T40RISC, EX50, 1T40L, EX40, EX29F Transmission Specific Limits and Procedures.

GKN

  • V410012 Cleanliness of Transmission Parts.

HUTCHINSON

  • C/007 Specification of supply of bought components.
  • DQS 09 02 02 Cleanliness Requirements for Suppliers.
  • FMS DQS xx 01 02 Specification for cooling system plastic parts.
  • STI_1094_H Flexibles automobile cleanliness.

JAGUAR LAND ROVER

  • ESG4D3-19G306-AA JRL Engineering Specification (ES) Engine Fastener Cleanliness
  • ES GX73 19A216 BA (ES GX73 030501 AA) JRL Engineering Specification Front End Accessory Drive Component Cleanliness.

JCB   

  • DP 01/9993/0006 JCB Group Standard engine cleanliness

JOHN DEERE   

  • JDS-G169 Cleanliness of Fluids, Parts, Components, and Systems
  • RES 251333 Drivetrain Part Cleanliness “Particle Size” Standard

KYB

  • 04-109 System management manual for suppliers.

LEAR

  • LS TS General TechNical Cleannliness.

MAGNA            

  • DS-GL-05-S-0540 Technical cleanliness standard driveline systems.
  • MPT-GL-03-S-4340 Examination of technical cleanliness standard Magna powertrain.

MAGNET-SCHULTZ

  • W0181-00 Technical Cleanliness. Purpose and Application.

MAHLE

  • GN AR.01024 Material Standard: Requirements on the Cleaning Quality of Internal as well as External Bought-In Parts for Aluminum Brazing, Aluminum Castings as well as for Aluminum Welding Process.
  • PN AR.01042 Prüfnorm. Bestimmung des Restschmierstoffgehaltes auf metallischen Werkstoffoberflächen.
  • PN AR.07227 Test Standard: Compressor Component Particulate Contamination Measurement.

MARELLI      

  • 00130911.E.1- H.E.V. – Cleanliness specification.

PACCAR      

  • CPP0331 Corporate standard: Cleanliness. engine and engine-related parts.

PIERBURG      

  • PN 02.035 Part Cleanliness Classification.

PSA

  • B22 6248 STN circuit de refroidissement elements en plastique.

RENAULT

  • 34-00-186 Procedure d’essai: Méthode de qualification d’une gamme d’extraction de la pollution particulaire.
  • 34-07-005 Product specification: Cleanliness of the oil system for all types of vehicles.
  • 34-07-012 Product specification: All types of vehicles cleanliness of the cooling circuit.
  • 34-07-024 Cahier des charges: Proprete des ciscuits de fluide refrigerant pour conditionnement d’air.
  • 34-07-025 Product specification: All vehicles types. Air system Cleanliness.
  • 35-00-035 Cahier des charges: Véhicles tour types. Proprete des composants des chaines cinematiques.
  • 39-00-005 Procedure d’essai: Procedure generique d’extraction de la pollition particulaire des pieces
  • 39-06-008 Cahier des charges: Tuyaux pour circuit de refroidissement.

ROBERT BOSCH

  • 0 265 P60 822 Anlage zur Prüfvorschrift Technische Sauberkeit
  • PV 1279 921 533 Appendix test specification technical cleanliness Metal Bracket
  • 0140Y02768 Test specification / Technical cleanliness aluminum die cast part
  • 02048648K8 Cleanliness spec. oil Tierod iB2-c
  • 0265 R40 136 Ordering Specification: Cleanliness specification IPB
  • 1 279 925 760 Test Specification technical cleanliness: part and componets from  external supplier for Power Electronics
  • F03ZY0007N Test Specification Technical cleanliness – external (parts or components /
  • PV 1 279 921 533 specification technical cleanliness
  • AS ZFLS N 5-1 Cleanliness of AS Products

SANDEN           

  • ES-0048 Engineering Standard. Specificantions for automotive product cleanliness

SCANIA            

  • STD4189 Renhetsteknik – Ytors Renhet i System – G-metoden / Contamination control – Surface Cleanliness in Systems – the Gmethod
  • STD4540 Specification and determination of technical cleanliness in media carrying systems
  • TB1815 Technical Regulation: Contamination Control Gearbox and component cleanliness
  • TB1790 Technical Regulation: Contamination Control Axle system and component cleanliness
  • PD3107018  Requirements Specification. CBP Cleanliness Outlier Rule

SCHAEFFLER   

  • S 252001-1 Tribology / Chemistry / Cleanliness classes. Standard cleanliness classes for products manufactured and purchased by Schaeffler Group
  • S 252001-2 Tribology/Chemistry / Cleanliness classes. Product cleanliness – particle size classes
  • S 252011 Tribology and Chemistry / Cleanliness classes Cleanliness analysis – Principles, development of methods
  • S 252012-100 Tribology/Chemistry / Cleanliness classes. Chemical Engineering.TecSa Standard spray extraction. Cleanliness inspection
  • S 252012-40-1 Tribology / Chemistry / Cleanliness classes. Parts for E-Motors. Cleanliness inspection
  • S 252012-45-41 Tribology / Chemistry / Cleanliness classes. Wiring harnesses for electric axles / e-mobility. Cleanliness inspection

SEG  AUTOMOTIVE   

  •  0127Y05137 PRV tech. Cleanliness screws

SK    

  • BS12003-01 Battery Specification: Foreign Particle for Module Parts

THYSSENKRUPP

  • WNB-881-E Technical Cleanliness Regulation

TRW     

  • A0004R3626 Technical specification. Cleanliness specification for ABS.
  • A0005U8237 Technical specification. Cleanliness specification for non hydraulic circuit components.
  • S0001322 Company Standard. Cleanliness of Components and Assemblies of Steering Systems Definition and Classification.

VITESCO           

  • TST N 30202.21 Standard for product cleanliness. Product cleanliness for power electronics
  • SPE 10399121 Particle Extraction Procedure

VÖITH 

  • VN 3221 Component Cleanliness

VOLVO

  • STD 107-0002 Contamination control. Cleanliness of components and systems. Test method.
  • STD 107-0003 Contamination control. Cleanliness audits of manufacturing processes. Procedure and checklist.
  • STD 107-0006 Contamination control. Cleanliness requirements on parts/components and their handling.
  • STD 107-0009 Contamination control. Cleanliness – Maximum permitted duration of exposure. Test method.
  • STD 107-0010 Contamination control. Cleanliness preservation packagings. Packaging requirements.

VOLKSWAGEN

  • PV 3336 Cleanliness of Lines and Circuit Parts. Determining Residual Particle Quantities.
  • PV 3347 Cleanliness of Engine/Motor Parts. Determining Residual Particle Quantities.
  • PV 3369 Cleanliness of Automotive Parts and Logistics Packagings. Determining Residual Particle Quantities Using Air Extraction.
  • PV 3370 Cleanliness of Automotive Parts. Automatic Transmissions, Manual Transmissions, Electric Drives, and Their Individual Parts. Determination of Residual Particle Quantities Using Wet Extraction.
  • PV 3377 Sauberkeit von Motorenbauteilen. Bestimmung der Restpartikelmengen an Zylinderkurbelgehäuse-Rohteilen.
  • PV 6368 Fluoreszenzintensitätsmessung an Schweißbaugruppen. Prüfung und Beurteiung der Sauberkeit von Fügeflächen.
  • PV 8205 GNG-Druckspeicher. Restschmutzermittlung.
  • PV 8220 Components from the Refrigerant Circuit. Cleanliness Analysis.
  • VW 01134 Cleanliness Requirements for Engine Parts / Sauberkeitsanforderungen an Motorenbauteile.
  • VW 01135 Medienführende Motoranbauteile. Sauberkeitsanforderungen für Ansaug-, Lade- und Unterdruckbereiche.
  • VW 01136 Kraftstoffführende Motoranbauteile. Sauberkeitsanforderungen.
  • VW 01137 Fluid-Conveying Area. Cleanliness Requirements for Coolant-Conveying C.omponents.
  • VW 01149 Technical Cleanliness. General Requirements / Technische Sauberkeit. Allgemeine Anforderungen.
  • VW 82082 Otto-DE-hochdruckpumpen. Technische Sauberkeit.
  • VW 82126 Technical Cleanliness of Electrical, Electronic, and Mechatronic Components. Requirements for the Development and Manufacturing Processes.
  • VW 85001 Motorbauteile. Technische Sauberkeit von ZSB Kolben – Pkw. Anforderungen und Prüfungen.

WABCO

  • JED 593 Cleanliness of parts and devices.

ZF

  • ZFN 1132 Technical Cleanliness of ZF Products.
  • WN 70/13 Design guides. Determination of residues of dirt on individual components.
  • 0000 701 604 Sauberkeit von Getriebeteilen.
  • 0000 700 815 Sauberkeitsuntersuchung an Getriebebauteilen mittels Ultraschall Extraktion.
  • 4460.700.101 Restschmutzgrenzen Komponenten für Achsgetriebe.
  • S0001322 Cleanliness of Components and Assemblies of Steering Systems Definition and Classification.

Consúltenos

Llámenos al teléfono (+34) 931 595 691

O bien complete el siguiente formulario y le contactaremos a la mayor brevedad posible.




    El Responsable del tratamiento de sus datos es BIDEA AUTOMOTIVE S.L.U., con domicilio en Mejia Lequerica 8, 08028 de Barcelona, con el NIF B65572950. Le informamos que trataremos la información que usted nos facilite con el fin de contestar su solicitud de información y de remitirle comunicación comercial sobre nuestros servicios que puedan ser de su interés. Si usted no desea recibir información comercial, rogamos nos lo informe enviando un e-mail a info@bidea-automotive.com. Los datos personales proporcionados se conservarán mientras usted no solicite su supresión. Le informamos que usted tiene derecho a acceder a sus datos personales, así como a solicitar la rectificación de los datos inexactos o, en su caso, solicitar su supresión a cualquier momento. La base legal para el tratamiento de sus datos es el consentimiento otorgado al clicar la casilla de aceptación al final de este formulario.